Electric saw oil is perhaps the most important and necessary consumable. It is he who has a positive effect on the operation of the instrument. Good oil greatly simplifies the operation of this device. With it, the cutting blade is in better contact with materials with different structures. In addition, thanks to this consumable, the tool can last much longer.
Let's figure out how to choose the right oil for your electric saw.
What is it for?
Many owners of electric saws ask a reasonable question, why does this tool need oil. The answer is simple - this tool is used as a lubricant for the chain in order to neutralize the impressive force of friction between individual parts. Due to the presence of oil, the important elements of the device do not suffer from excessive heat when they come into contact with each other.
Sometimes there are cases in which extra effort has to be made to cut. This fact signals an insufficient amount of lubricant or its questionable quality. In such a situation, experts advise to look at the oil level in the unit reservoir as soon as possible. You can immediately add additional oil to the chain to complete the work already started.
With good oil applied on time, the saw will not only work more efficiently and lighter, but also longer. Equipment deprived of such maintenance is subject to very serious breakdowns. It is unlikely to last long.
Kinds
On the modern market, there are several options for oil intended for processing chain saws. These formulations can be mineral, synthetic or semi-synthetic based. It should be borne in mind that the latter include both synthetic and mineral components. Another category of modern chain oils for electric saws from different companies is represented by products based on raw materials of plant origin. Of course, each group of oils has its own advantages and disadvantages.
If we consider the properties of all oils from the point of view of stability and the ability to operate effectively in rather difficult conditions, then, of course, synthetic products come out on top. They are capable of operating electric saws even in very cold weather (up to -40 degrees). However, these types of oils have one important drawback that must be taken into account - they are expensive. This is why many consumers are abandoning their purchase in favor of more affordable options.
As for the popular mineral oils, they are much cheaper than the synthetic ones . However, their performance characteristics are very inferior to those of the above compositions.
At a temperature of -25 degrees, the lion's share of mineral oils simply stops flowing to the area where destructive friction of the saw parts occurs, that is, it ceases to perform its main function. Such oil should not be used in the cold winter period - in the cold it will be ineffective or even completely useless.
Semi-synthetic oils are a cross between synthetic and mineral products. These types of oils are produced for both electric and gasoline devices.
Today, it is not difficult to find the lubricant for the saw chain. Such products are produced by many well-known brands. The main thing is to choose the right composition, knowing about the optimal performance characteristics.
Popular brands
As mentioned above, there are many brands of modern saw oils. Among them there are both little-known and very popular ones. If you decide to purchase high-quality and reliable saw oil, then you should familiarize yourself with the list of the most popular models.
Forest plus
This oil is in great demand and has excellent adhesion properties. Forest plus is characterized by the fact that it can be operated if the temperature outside the window is at least -15 degrees.
If all conditions of storage and use of this product are observed, it can remain of high quality for 3 years.
Bio Plus
The company's products called Bio Plus are plant-based. Oils from this company, when penetrated into the soil, very soon begin to decompose. Not every oil can boast of such a distinction. It is permissible to use this product at temperatures up to -15 degrees, like the previous version.
Sunth plus
This equally popular oil is made on the basis of synthetic components. It easily endures a fairly serious load on the equipment.
It can be used in already more severe conditions - the ambient temperature can reach -25 degrees.
Because of this, the oil will not stop acting and flow to the desired nodes.
Champion
Champion adhesive oil is usually used for work with a rather wide temperature range. This grease is sold in containers of 3 and 10 liters. The product is inexpensive and easy to use.
Husqvarna
The name of this world famous brand inspires trust. Husqvarna Saw Oil is the most cost effective and economical solution for lubricating electric saw mechanisms. These products are characterized by moderate consumption and high efficiency.
Can engine oil be used?
Whether it is permissible to use engine oil as a saw lubricant is another common question from tool owners.
In fact, transmission and engine compounds can be used to lubricate the chains of individual models, but it should be borne in mind that such mineral compositions are best avoided.
It should be borne in mind that such compositions are suitable exclusively for specific saw models . The fact that the tool can be lubricated with engine or gear oils must be indicated in the technical documentation attached to the equipment.
Never lubricate the chain with such agents unless authorized by the manufacturer. Keep in mind that these formulations are not designed for the operating conditions of the chain. They simply will not be able to fully protect the equipment. Therefore, it is better not to take risks and not resort to using these types of oils.
Ordinary vegetable oils are not suitable for lubricating the chain mechanism . Of course, they will have a short lubricating effect, but it is worth remembering that such compositions have a characteristic property - they dry out. Subsequently, this can lead to the fact that the chain will move very poorly in the mechanism, with delays. Because of this, the performance of the saw as a whole will noticeably deteriorate, therefore it is not recommended to experiment with vegetable oils in relation to this technique.
How to choose?
If you want your electric saw to serve for a long time and not give you any trouble, then you should choose high-quality oil for it. This issue should be approached very seriously, because the condition and performance of not the cheapest tool will depend on your choice.
There are several basic criteria to consider when choosing a lubricant.
- As mentioned above, engine or transmission oil may only be used if permitted by the tool manufacturer. Open the instructions - there should be a point about the permissibility of using such oils. Also, do not use only mineral formulations. Engine oil can not only lubricate the chain, but also clean the various systems in the device.
- It is advisable to buy a specialized lubricant for electric saws from different companies. On sale you can find many options for such compositions. Often, both saws and oils for them are made by one manufacturer. It is worth purchasing formulations with good adhesion properties. These oils will not slip off the chain while the saw is in use. In addition, the composition must be branded.
Handicraft and too cheap oils should not be trusted, they can only harm the instrument.
- Some people turn to used engine oil when caring for their electric saw. It is important to know that such a composition is extremely contaminated. Therefore, it can severely pollute the entire system, and with it the circuit itself.
Many users claim that their electric saw continues to operate normally with this lubrication, but experienced professionals strongly advise against using waste oils.
Usage tips
Choosing the right saw oil is not enough. You also need to know how to properly pour it into such a technique.
So, modern models of electric saws are equipped with a special well thought-out system for the automated supply of lubricant to the necessary units, where friction occurs during the operation of the tool.
If your toolkit has such a technique, then you don't have to come up with anything superfluous. You just need to carefully pour the selected suitable oil into a specially designated container. After that, it is worth letting the device run for just a few seconds, but without load (the saw should operate "idle"). During this work of the technique, the lubricant will "disperse" as evenly as possible along the entire length of the chain.
If your saw belongs to the already outdated models, then the above mentioned automatic supply system (as well as adjustment) of oil is simply not there. Therefore, you will need to refuel the saw in a different way. In this case, it is necessary to dip the chain in the existing lubricant.
It is permissible to use brushes or a grease gun for lubricating an important tool assembly. Compositions in special aerosol-type packaging are most suitable for such purposes, they are very convenient to use.
Why doesn't it go to the chain?
Many owners of electric chain saws are faced with the fact that at some point the oil is no longer supplied to the required component of the tool. It is worth considering that such a problem may ultimately lead to more serious troubles.
This can be due to several factors.
- If you notice that the oil is not going to the tool chain, this may indicate that the oil pump and its gears may have failed. It is advisable to notice such breakdowns on time.
- This may also happen due to a serious blockage of the passages in the oil filter, through which the lubricant passes to the chain of the device.
- Also, this trouble often arises due to clogged holes in the tire.
- If the oil container is depressurized, then the indicated problem will happen inevitably.
As you can see, there can be many reasons for the lack of oil supply to the required saw units. Of course, in most cases you can figure it out on your own, but it is better not to waste time and not conduct experiments, but seek help from specialists with rich experience in such matters.
Useful Tips
It is important to keep in mind that under conditions of increasing engine speed, the pumping speed of the lubricating composition also increases significantly. That is why it is only required to pour the oil mixture into the electric saw when the engine is turned off.
If you decide to refuel your equipment with used oil, then you should consider that it can harm the saw. In no case, do not refer to such compositions, especially if you have a new instrument.
To buy lubricants for the electric saw chain should be exclusively in specialized retail outlets. Only such products are of high quality and effective. You should not buy goods in markets or street shops . Most likely, they will sell you a fake there, which will not only be useless, but will also lead to a breakdown of the instrument.
There are a lot of oils on sale. But the best option is an oil with good adhesion properties . These products contain special additives. Thanks to the latter, the composition does not shake off and does not flow off the saw chain as it actively rotates. Only such a remedy will be effective and will have a beneficial effect on the condition of the instrument.
How to choose oil for an electric saw, you will learn from the video below.